How to Jailbreak iPhone with an Android Device?

0
253
How to Jailbreak iPhone with an Android Device
How to Jailbreak iPhone with an Android Device

How to Jailbreak iPhone with an Android Device?. checkra1n is a semi-tethered jailbreak, developed primarily by Luca Todesco (qwertyoruiop). It’s based on the checkm8 bootrom exploit released by axi0mx. checkra1n supports iOS 12.3 and newer, iPadOS 13.1 and newer, and tvOS 12.0 and newer.

The tutorial is just for educational purposes. We are not responsible if your harm your devices after reading this article.

This may not work for you. The checkra1n is also in beta version. 

Video Demo

Prerequisites

  • Any iOS Device that is compatible with checkra1n. (Please check the FAQs below)
  • An Android device with Root Access. Any latest device with updated version is recommended. (How to Root?)
  • Install Termux app in the Android device.
  • USB-C to USB-A Adapter. (You have to buy it.)
  • A Lightning Cable. (You must have this cable as this is the same cable you use to charge your iOS Device)

Make sure, you have an original Lightning Cable for your iOS device and a good quality USB-C to USB-A Adaptor because cheap cables don’t have all pins in the cable. That means DFU will not happen properly.

How to Jailbreak an iPhone with an Android Device?

1. Download the checkra1n Binary for Linux from their official website.

You can check for your phone’s architecture by running this ADB command on your computer while your phone is connected:

adb shell getprop ro.product.cpu.abi

Learn More: How to Install ADB Drivers on Windows, macOS, and Linux?

2. Place the downloaded binary into /data on your rooted Android phone.

3. Connect your iOS device to your Rooted Android Device.

4. Open Termux app in your Android device.

5. Type below command in Termux app to get superuser access.

su

6. Next, type below command to see if the Android device recognized your iOS device or not.

lsusb

The output USB ID should be 05ac:12a8

7. Now, put your phone into DFU Mode. (Read the tutorial below.)

8. Type below command again to see if the Android device recognized your iOS device or not.

lsusb

The output USB ID should be 05ac:1227

9. Run checkra1n in CLI mode using the below command.

./checkra1n -c

10. Your iDevice should now be jailbroken.

How to Enter DFU Mode in iOS Device?

DFU or Device Firmware Upgrade mode allows all devices to be restored from any state.

A9 and Older Devices (iPhone 6s and below, iPhone SE and iPod touch 6 and below)

  1. Hold down both the Home button and Lock button.
  2. After 8 seconds, release the Lock button while continuing to hold down the Home button.
    • If the Apple logo appears, the Lock button was held down for too long.
  3. Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.
    • If your device shows a screen telling you to connect the device to iTunes, retry these steps.

A10 devices (iPhone 7 and iPhone 7 Plus, iPad 2018, iPod touch 7)

  1. Hold down both the Side button and Volume Down button.
  2. After 8 seconds, release the Side button while continuing to hold down the Volume Down button.
    • If the Apple logo appears, the Side button was held down for too long.
  3. Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.
    • If your device shows a screen telling you to connect the device to iTunes, retry these steps.

A11 and Newer Devices (iPhone 8 and above, iPad Pro 2018, iPad Air 2019, iPad Mini 2019)

  1. Quick-press the Volume Up button
  2. Quick-press the Volume Down button
  3. Hold down the Side button until the screen goes black, then hold down both the Side button and Volume Down button.
  4. After 5 seconds, release the Side button while continuing to hold down the Volume Down button.
    • If the Apple logo appears, the Side button was held down for too long.
  5. Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.
    • If your device shows a screen telling you to connect the device to iTunes, retry these steps.

Frequently Asked Question (FAQ)

All A6 to A11 Devices are compatible with checkra1n jailbreak.

iPhone 5C , iPhone 5S, iPhone 6 , iPhone 6+ , iPhone 6S , iPhone 6S+ iPhone SE, iPhone 7, iPhone 7+ , iPhone 8 / iPhone 8+, iPhone X.

iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Pro (12.9 in), iPad Pro (9.7 in) , iPad Pro (10.5 in), iPad 6G, iPad 7G

iOS 12.3 / iOS 12.3.1 / iOS 12.4 / iOS 12.4.1 / iOS 13 / iOS 13.1.1 / iOS 13.1.2 / iOS 13.1.3 / iOS 13.2 / iOS 13.2.2 / iOS 13.2.3 / iOS 13.3 and iOS 13.3.1 Beta

Please Like, Share and Comment your valuable thoughts  🙂 

Thanks for patronizing Ultimate Tech. This post is about, "How to Jailbreak iPhone with an Android Device?" and last updated on March 6, 2020. I am sure your visit to us must be quite satisfying and in line with your expectations from us. Just in case, it’s not as you expected from us or if you are facing any problem, kindly forward your feedback’s directly to us by leaving a Comment below. And, get assured response from my side. Your feedback’s and suggestions are extremely valuable to us. This Post is written by Harman Singh Hira. There is not any source, if any, then already mentioned so Copying or using this post’s content for your own site is not allowed. If anyone do so, get ready for facing DMCA. Please, if you like this post then share on your social networking sites. Assuring you of our best service always.

Special Thanks

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.