How to Hack WPA/WPA2 WiFi in Kali Linux with Fluxion Attack?

0
2771
How to Hack WPA/WPA2 WiFi in Kali Linux with Fluxion Attack?
How to Hack WPA/WPA2 WiFi in Kali Linux with Fluxion Attack?

Maybe, you already read my previous tutorial on hacking WPS WiFi in Android. So, How to Hack WPA WiFi in Kali Linux with Fluxion Attack? WiFi is a technology for wireless local area networking with devices based on the IEEE 802.11 standards. To connect to a Wi-Fi LAN, a computer has to be equipped with a wireless network interface controller. The combination of computer and interface controller is called a station. For all stations that share a single radio frequency communication channel, transmissions on this channel are received by all stations within range. The transmission is not guaranteed to be delivered and is therefore a best-effort delivery mechanism. A carrier wave is used to transmit the data. The data is organised in packets on an Ethernet link, referred to as “Ethernet frames”.

Fluxion is a remake of linset by vk496 with (hopefully) less bugs and more functionality. It’s compatible with the latest release of Kali (rolling). The attack is mostly manual, but experimental versions will automatically handle most functionality from the stable releases.

We, the team of Ultimate Tech, publish this article just for checking security of authorised WiFi only. Fluxion is intended to be used for legal security purposes only, and you should only use it to protect networks/hosts you own or have permission to test. Any other use is not the responsibility of the developer(s). Be sure that you understand and are complying with the Fluxion licenses and laws in your area. In other words, don’t be stupid, don’t be an asshole, and use this tool responsibly and legally.

Prerequisites

  • Kali Linux OS
  • An External WiFi Card (Recommended)

Clone Git Repository

First of all, you need to clone GitHub Repository on your Kali Linux Desktop by typing below command

git clone https://github.com/FluxionNetwork/fluxion

Note:  Fluxion was deleted many times before, so if above command isn’t working then comment down below for update.

Change Directory (Only If)

Only if, you have downloaded Fluxion Script manually in your Kali desktop then enter below command in terminal to change directory.

cd fluxion

Now enter below command to make it works

sudo ./fluxion

Install Fluxion

Now, you have to install script in your Kali terminal by entering below command.

sudo ./install/install.sh

We have to enter below command to make it run

sudo ./fluxion

Hack WPA/WPA2 WiFi

We need to create fake WiFi hotspot first, so for that basic settings will be appeared in Terminal such as selecting language, etc. Then:

  1. Select victim’s WiFi.
  2. Choose your target AP
  3. Select your Attack
  4. Get a Handshake
  5. Create the Fake Login Page
  6. Capture the Password

Video Tutorial

You can also watch video tutorial on “Hacking Tutorial’s” YouTube Page

Video Tutorial

You can find more detailed guide at Null Byte, but their scripts are outdated.

Please Like, Share and Comment your valuable thoughts.

Thanks for patronizing Ultimate Tech. This post is about, “[ut_pt]”. I am sure your visit to us must be quite satisfying and in line with your expectations from us. Just in case, it’s not as you expected from us or if you are facing any problem, kindly forward your feedback’s directly to us by leaving a Comment below. And, get assured response from my side. Your feedback’s and suggestions are extremely valuable to us. This Post is written by the team of Ultimate Tech. There is not any source, if any, then already mentioned so Copying or using this post’s content for your own site is not allowed. If anyone do so, get ready for facing DMCA. Please, if you like this post then share on your social networking sites. Assuring you of our best service always.

Leave a Reply

avatar

This site uses Akismet to reduce spam. Learn how your comment data is processed.